The T4RRT is a round tube for products with a OD of 4″ (example products: SB1, SB116, GN5)
An Extra Ten Inches Clearance Between Your Truck and RV. Note: The top plate is 10″ square with the holes for extra bolts inset 1/2″. If it is not possible to bolt to the bottom of your king pin box, you may have to weld it.
The RV4XL allows you to pull a fifth wheel with your flatbed truck and gooseneck hitch.
For Flatbed Trucks. 9″ offset adapter for flatbed trucks. The RV4 allows you to pull a fifth wheel with your flatbed truck and gooseneck hitch.
A single progressive shock dampening cushion combined with a special anti-friction inner sleeve tames the bucking and bouncing that some truck/trailer combinations create.
This fifth wheel gooseneck adapter allows you to tow your fifth wheel trailer with the convenience of a 2 5/16″ gooseneck ball. This enables the full use of the pickup bed when it’s not being used for towing.
This fifth wheel gooseneck adapter allows you to tow your fifth wheel trailer with the convenience of a 2 5/16″ gooseneck ball. This enables the full use of the pickup bed when it’s not being used for towing.
This fifth wheel gooseneck adapter allows you to tow your fifth wheel trailer with the convenience of a 2 5/16″ gooseneck ball. This enables the full use of the pickup bed when it’s not being used for towing.
The RVGC-CA (Cushion Adjustable) is a product that will allow you to pull your 5th wheel camper with a Gooseneck ball without having to bolt on an adapter. This is a one piece product that bolts into your existing bolt holes where your king pin box is mounted currently. Simply unbolt your existing king pin box and install the RVGC in the same bolt holes. This product is rated at 24,000 lbs and a tongue weight rating of 6,500 lbs. A smooth ride for you and your cargo without bulky air bags. A single high-tech cushion does the job.
Gooseneck CouplersGooseneck CouplersStraightCouplersAll ProductsShortbedOffset CouplersAll ProductsFlatbedOffset CouplersAll ProductsCushionCouplersAll ProductsRVGC 4200A Gooseneck Coupler – Non-CushionedCLICK HERE FOR FIT CHART The RVGC Gooseneck Coupler is a product that will allow you to pull your 5th wheel camper with a Gooseneck ball without having to bolt on an adapter. This is a one piece product that bolts onto your existing bolt holes where …
FL1005
Standard Replacement Ball for FlipOver Hitch.
NOTE: This product will not work with the 317 or 318 models, call for replacement balls for these models.
FL1005B
Hi-Rise Ball for Flip-Over Hitch.
**ONLY FITS Flip-Over Hitches made by PopUp**
FL1005-3
3″ Ball for Flip-Over Hitch. Allows you to pull a trailer equipped with 3″ coupler.
Companion post for Flip-Over hitch, adapts to older Companion 5th wheel hitches.
Converts from our round hole to a square post for mounting accessories.
Does not fit the new model 3500 Companion 5th Wheel hitch rated at 20k. Use product # FLC-1.
FL4
4″ Offset Ball fits Flip-Over Invertible Gooseneck ball socket and provides added trailer swing with more clearance to cab and rear of tow vehicle.
5,000 pound tongue capacity and 20,000 pound trailer capacity.
** ONLY FITS Flip-Over Hitches made by PopUp **
NOTE: The FL4 will not work with the 317 or 318 models
FL2
Standard King-Pin accessory fits Flip-Over Invertible Gooseneck Ball socket. FL2 pivots in socket for unsurpassed king-pin life.
The Flip-Over Ball Model 200 is designed to fit flat bed trucks with 1/8″ steel decks.
Because the Flip-Over ball rotates in its socket, hitch ball and coupler life are greatly extended. They don’t “grind” against each other when you tow. The other advantage of a rotating ball is that it stays “free” in its socket so you can easily turn it over when you want a level floor in your truck.
The PopUp Ball Model 100 is designed to fit flat bed trucks with 1/8″ steel decks.
Gooseneck Ball HitchesGooseneck Ball HitchesFlipOver HitchAll ProductsSemi HitchesAll ProductsQuick Facts Raise or hide ball instantly with rod in rear wheel well of truck. 2-5/16″ ball. Bolts in place using existing frame holes. Installs quickly without loosening bed. Grade 5 and 8 installation hardware provided. 30,000 lbs. Gross Trailer Weight. 7,500 lbs. Gross Tongue Weight. Hitch ball fits in 3″ hole …