The SB2XL – 9″ offset square coupler for flatbed trucks provides an extra 9″ on the nose of the trailer to help provide more turning radius when using short bed trucks. The SB2XL has a GTW of 24,000 lbs and has our patented self latching coupler with easy release cable included. To give you the longest lasting finish we can, we powder coat all our products that will last for years.
PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up. To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.
SB3 – 9″ offset, 4″square coupler. This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.
SB3XL – 9″ offset, 4″ square coupler tube. Designed for flatbed truck owners with a recessed cavity for the ball. It adds 4″ of height below the offset to raise it enough to allow clearance with the bed of the truck when turning.
PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up. To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.
The Flip-Over Ball is locked in the one-piece ball socket with a spring loaded stainless steel pin. To invert the ball, just reach into the driver side rear wheel well and rotate the actuating rod 90 degrees. This cams the retaining pin to the open position. Invert the ball and rotate the actuating rod back to its original locked position. That’s all there is to it!
Tow a gooseneck with a short bed truck in smooth comfort with this extended cushion coupler. The nine inch offset provides much needed clearance between your trailer and your cab for more turning radius.
Tow a gooseneck with a short bed truck in smooth comfort with this extended cushion coupler. The nine inch offset provides much needed clearance between your trailer and your cab for more turning radius.
Tow a gooseneck with a short bed truck in smooth comfort with this extended cushion coupler. The nine inch offset provides much needed clearance between your trailer and your cab for more turning radius.
The CC2 is furnished drilled for use on trailers with a safety thru pin. However, the pin cannot be used because of the internal mechanism of the Cushion Coupler
The CCK is furnished drilled for use on trailers with a safety thru pin. However, the pin cannot be used because of the internal mechanism of the Cushion Coupler.
Part measures 4″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken. Please see return policy. Any returns must be handled through the dealer you purchased from.
Part measures 4 1/2″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken.
Part measures 4″ outside diameter. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken.
Part measures 4″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken.
Part measures 4 1/2″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken.
Part measures 4″ outside diameter. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken.
Fits trailers with 4″ ID square tube
Part measures 4″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken. Please see return policy.
Fits trailers with 4 1/2″ ID square tube
Part measures 4 1/2″ outside to outside. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken. Please see return policy.
Fits trailers with 4″ ID round tube
Part measures 4″ outside diameter. Make sure it will fit as many of the China made tubes are not all sized consistently and many are under sized. PopUp will assume no responsibility for returns when incorrect measurements are taken. Please see return policy.