SB112 12″ Offset Round Coupler
This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds. Video shown is the SB1 9″ offset coupler, install procedure is the same.
WARNING! THE SB112 MUST ONLY BE USED WITH A SAFETY THRU PIN
- If your trailer doesn’t have a thru pin, drill a hole and install a 1/2″ or larger bolt.
- Verify that the gussets on the trailer will clear the side rails of your truck.
These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.
Short Bed Extended Couplers come with all necessary hardware and coupler release cable.
Installation takes about half an hour.
Fits trailers with 4″ ID round tube
Our Part measures 4″ outside to outside and is manufactured with USA steel. Make sure it fits your trailer downtube. Some manufacturers use Import tubes, and many are Not sized consistently or are out of round or square. PopUp assumes No responsibility for returns when incorrect measurements are taken. Please see return policy.
Quick Facts
- Fits trailers with 4″ ID round tube
- 7/8″ holes thru both sides
- Self-latching GN8 2-5/16″ coupler.
- Includes coupler release cable and hardware.
- Precision coupler casting extends life of ball.
- 12 Inch offset between truck and trailer.
- 24,000 lbs. GTW, 5,000 lbs. Vertical Tongue Wt.
Video
This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds. Video shown is the SB1 9″ offset coupler, install procedure is the same.
Made in America
What our customers are saying