Gooseneck

Pages: 1 2Next >Last »

SB1 9″ Offset Round Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • Fits trailers with 4″ ID round tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 7/8″ holes thru both sides

Price: $383.00

Loading Updating cart…

SB116 16″ Offset Round Coupler

PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up.  To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

WARNING!
THE SB116 MUST ONLY BE USED WITH A SAFETY THRU PIN

  • If your trailer doesn’t have a thru pin, drill a hole and install a 1/2″ or larger bolt.
  • Verify that the gussets on the trailer will clear the side rails of your truck.
  • DO NOT use 16″ models on 3-car wedge type trailers
Additional DescriptionMore Details

  • Fits trailers with 4″ ID round tube
  • 16 Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 7/8″ holes thru both sides

Price: $465.00

Loading Updating cart…

SB1XL 9″ Offset Round Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • For flat bed trucks with recessed ball
  • Fits trailers with 4″ ID round tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 7/8″ holes thru both sides

Price: $396.00

Loading Updating cart…

SB2 9″ Offset Square Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • Fits trailers with 4 1/2″ ID square tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $371.00

Loading Updating cart…

SB216 16″ Offset Square Coupler

PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up.  To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

WARNING!
THE SB216 MUST ONLY BE USED WITH A SAFETY THRU PIN

  • If your trailer doesn’t have a thru pin, drill a hole and install a 1/2″ or larger bolt.
  • Verify that the gussets on the trailer will clear the side rails of your truck.
  • DO NOT use 16″ models on 3-car wedge type trailers
Additional DescriptionMore Details

  • Fits trailers with 4 1/2″ ID square tube
  • 16 Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $456.00

Loading Updating cart…

SB2XL 9″ Offset Square Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • For flat bed trucks with recessed ball
  • Fits trailers with 4 1/2″ ID square tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $383.00

Loading Updating cart…

SB3 9″ Offset Square Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • Fits trailers with 4″ ID square tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $368.00

Loading Updating cart…

SB316 16″ Offset Square Coupler

PopUp Extended Coupler gives you an additional sixteen inches clearance between the truck cab and the trailer nose, and between the truck tailgate and the trailer bulkhead. This gives you more trailer swing and more room for hook-up.  To make your towing experience better yet, this extended coupler is fitted with a PopUp GN8 self-latching coupler.

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

WARNING!
THE SB316 MUST ONLY BE USED WITH A SAFETY THRU PIN

  • If your trailer doesn’t have a thru pin, drill a hole and install a 1/2″ or larger bolt.
  • Verify that the gussets on the trailer will clear the side rails of your truck.
  • DO NOT use 16″ models on 3-car wedge type trailers
Additional DescriptionMore Details

  • Fits trailers with 4″ ID square tube
  • 16 Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $446.00

Loading Updating cart…

SB3XL 9″ Offset Square Coupler

This coupler latches when the trailer is lowered onto the ball. It also has a molded hitching guide to make coupling easier. To uncouple, you simply pull a release cable located near the trailer jack handle. The GN8 coupler has a rating of 28,000 pounds.

These units are fabricated using extra heavy wall tubing for maximum strength. They are rated at 24,000 pounds gross trailer weight.

Short Bed Extended Couplers come with all necessary hardware and coupler release cabling.

Installation takes about half an hour.

Additional DescriptionMore Details

  • For flat bed trucks with recessed ball
  • Fits trailers with 4″ ID square tube
  • Nine Inch offset between truck and trailer.
  • Fits standard trailer coupler tubes.
  • Self-latching GN8 2-5/16″ coupler.
  • Precision coupler casting extends life of ball.
  • 24,000 lbs. Gross Trailer Weight.
  • Extra heavy wall tube for maximum strength.
  • Includes coupler release cable and hardware.
  • 1″ holes thru both sides

Price: $383.00

Loading Updating cart…

SB5 9″ Offset – 4″ Round tube

Additional DescriptionMore Details

  • Standard king-pin with 10” round bolster plate fitted to 18” long square or round tube
  • Fits standard gooseneck trailer coupler tubes
  • Allows gooseneck trailers to be pulled with Semi-tractors
  • Pull a gooseneck trailer with a pickup mounted fifth wheel
  • These products are available in straight or a 9” offset strong walled tube round or square with a kingpin instead of a coupler
  • Rated at 24,000 lbs
  • Long lasting powder coat finish

Price: $325.00

Loading Updating cart…

SB6 9″ Offset – 4 1/2″ Square tube

Additional DescriptionMore Details

  • Standard king-pin with 10” round bolster plate fitted to 18” long square tube
  • Fits standard gooseneck trailer coupler tubes
  • Allows gooseneck trailers to be pulled with Semi-tractors
  • Pull a gooseneck trailer with a pickup mounted fifth wheel
  • Rated at 24,000 lbs
  • Long lasting powder coat finish

Price: $316.00

Loading Updating cart…

SB7 9″ Offset – 4″ Square tube

Additional DescriptionMore Details

  • Standard king-pin with 10” round bolster plate fitted to 18” long square tube
  • Fits standard gooseneck trailer coupler tubes
  • Allows gooseneck trailers to be pulled with Semi-tractors
  • Pull a gooseneck trailer with a pickup mounted fifth wheel
  • Rated at 24,000 lbs
  • Long lasting powder coat finish

Price: $310.00

Loading Updating cart…
Pages: 1 2Next >Last »