RV5 Extended Kingpin
NOTICE! All RV5’s are now powder coated BLACK
An Extra Ten Inches Clearance Between Your Truck and RV.
Note: The top plate is 10″ square with the holes for extra bolts inset 1/2″. If it is not possible to bolt to the bottom of your king pin box, you may have to weld it.
Everyone who tows an RV needs more clearance between the truck and trailer.
NOTICE: The RV5 should NOT BE USED in conjunction with the RV1, RV2, RV3, RV4 or any other brand fifth wheel gooseneck adapter. NOT RECOMMENDED for king pins over 18″ in length, (may cause the back of the pin box to hit the bed rails when turning) Not recommended on pin boxes with cushions, or movement. Use on Standard OEM pin boxes only.
**CLICK HERE FOR MEASUREMENT CHART**
– MUST READ, IF YOU NEED AN ADAPTER YOU MUST TAKE PROPER MEASUREMENTS OR DAMAGE TO TRUCK MAY OCCUR.
Note: The top box must be bolted or welded to the pin box in conjunction with using the provided clamp block connector. Proper installation is very important, if your unsure during any part of the install please contact the factory for verification or installation clarification. PopUp Towing is not responsible for improperly installed products or products not used as they were originally intended.
Quick Facts
- More trailer swing.
- Fits standard OEM trailer king pin boxes ONLY.
- Installs quickly and easily.
- 24,000 lbs. Gross Trailer Weight.
- Long lasting powder coated finish.
- Easier hook-up.
- Bolts to king-pin box.
- Precision laser cut fabrication.
- 6,000 lbs. Gross Tongue Weight.
Video
You can always use more room for maneuvering, especially if you’re towing with a short bed truck. An extra ten inches between the rear bumper and the bulkhead of the trailer makes things easier, too. The RV5 adds 10″ of new clearance from king pin center to king pin center, giving you the extra clearance you need in a strong, easy to install accessory.
Made in America
What our customers are saying