RVGC Gooseneck Coupler – Adjustable Models
The RVGC Gooseneck Coupler is a product that will allow you to pull your 5th wheel camper with a Gooseneck ball without having to bolt on an adapter. This is a one piece product that bolts onto your existing bolt holes where your king pin box is mounted. Simply unbolt your existing king pin box and install the RVGC in the same bolt holes. This product is rated at 24,000 lbs and a tongue weight rating of 6,500 lbs.
The RVGC-A is the adjustable version which gives you 4″ of adjustment down by the coupler and most trailer manufacturers have adjustable whole patterns to allow you an extra 3″ of adjustment. Which makes the total about 7″ of adjustment.
Bolt hole location and number of holes will vary depending on the configuration of your current pin box model. Picture shown may not be the exact model for your application. The number of holes, and size of holes are specific to the pin box model currently on your unit.
SEE FIT CHART ABOVE TO DETERMINE WHAT MODEL FITS YOUR 5TH WHEEL.
CAG Convert A Goose 5th Wheel base plate for gooseneck hitches View
SB312 12″ Offset Square Coupler View
SB212 12″ Offset Square Coupler View
SB112 12″ Offset Round Coupler View
SB3-6 6″ Offset Square Coupler View
SB2-6 6″ Offset Square Coupler View
SB1-6 6″ Offset, Round Short Bed Coupler View
RV55 Extended Kingpin Adapter View
SB1 – 9″ Offset Round Coupler View
SB1XL 9 inch Offset Round Coupler