PRODUCT ACCESSORIES

Product Accessories

RV5 - 10" Extension

All Products

RV55 - 5" Extension

All Products
Image

RV5 Extended Kingpin

NOTICE! All RV5’s are now powder coated BLACK

An Extra Ten Inches Clearance Between Your Truck and RV.

Note: The top plate is 10″ square with the holes for extra bolts inset 1/2″. If it is not possible to bolt to the bottom of your king pin box, you may have to weld it.

Everyone who tows an RV needs more clearance between the truck and trailer.

NOTICE: The RV5 should NOT BE USED in conjunction with the RV1, RV2, RV3, RV4 or any other brand fifth wheel gooseneck adapter. NOT RECOMMENDED for king pins over 18″ in length, (may cause the back of the pin box to hit the bed rails when turning) Not recommended on pin boxes with cushions, or movement. Use on Standard OEM pin boxes only. 

**CLICK HERE FOR MEASUREMENT CHART**
– MUST READ, IF YOU NEED AN ADAPTER YOU MUST TAKE PROPER MEASUREMENTS OR DAMAGE TO TRUCK MAY OCCUR.

Note: The top box must be bolted or welded to the pin box in conjunction with using the provided clamp block connector.  Proper installation is very important, if your unsure during any part of the install please contact the factory for verification or installation clarification. PopUp Towing is not responsible for improperly installed products or products not used as they were originally intended.
Installation Instructions
Find a Dealer
Contact us

Quick Facts

  • More trailer swing.
  • Fits standard OEM trailer king pin boxes ONLY.
  • Installs quickly and easily.
  • 24,000 lbs. Gross Trailer Weight.
  • Long lasting powder coated finish.
  • Easier hook-up.
  • Bolts to king-pin box.
  • Precision laser cut fabrication.
  • 6,000 lbs. Gross Tongue Weight.

Video

You can always use more room for maneuvering, especially if you’re towing with a short bed truck. An extra ten inches between the rear bumper and the bulkhead of the trailer makes things easier, too. The RV5 adds 10″ of new clearance from king pin center to king pin center, giving you the extra clearance you need in a strong, easy to install accessory.

Made in America

What our customers are saying

  • “This is a 2019 Ford F-150 with 5’5” bed. I was worried about finding a product to get the clearance I needed to pull my horse trailer . My trailer is almost 79 inches wide . Installed the SB116 16” inch extension coupler on my trailer and I’ve pulled it several trips now and it works great. My trailer pulls great due to load is on the truck where it needs to be. Very well made and love the fact I don’t have to get up in the back of truck or reach over the bedside to hook up and unhook.  The folks at PopUp Towing were great to deal with and answered all my questions.”- Mark G.
  • “We installed a CAG (Connect-Adapt-Go) from PopUp Towing on a truck recently.  It went in very easily.  Instructions were very clear and we are very pleased in the outcome.  We will definitely do more business with PopUp Towing.”- Rick & Jean Horsch
  • “We purchased a CC2 Cushion Coupler by PopUp Towing. I’ll tell you what, after arriving home from the last horse show, we were amazed to find two cans of pop that were left on the dinette table still on the table. Now that’s a smooth ride!”- Larry P.
  • “I was having trouble explaining my issue and determining a solution to my turning issue when towing my gooseneck trailer. A friend of mine said, you should try to call the guys at PopUp Towing as they helped solve his issues. Let me tell you, I spoke with two gentlemen at PopUp if I remember correctly their names were Derrick and Chance, those to guys seem to have more knowledgeable information than anyone I’ve spoken with in this industry. Years of valuable knowledge, and highly recommended if you have similar issues. Thanks again and I absolutely love the new RVGC complete pinbox replacement to allow me to tow my 5th wheel without the bulky 5th wheel hitch taking up my bed space.”- Bill F.