- More trailer swing.
- Easier hook-up.
- Fits standard OEM trailer king pin boxes ONLY.
- Bolts to king-pin box.
- Installs quickly and easily.
- Precision laser cut fabrication.
- 24,000 lbs. Gross Trailer Weight.
- 6,000 lbs. Gross Tongue Weight.
- Long lasting powder coated finish.
NOTICE! All RV5's are now powder coated BLACK
An Extra Ten Inches Clearance Between Your Truck and RV.
Note: The top plate is 10" square with the holes for extra bolts inset 1/2". If it is not possible to bolt to the bottom of your king pin box, you may have to weld it.
Everyone who tows an RV needs more clearance between the truck and trailer.
You can always use more room for maneuvering, especially if you're towing with a short bed truck. An extra ten inches between the rear bumper and the bulkhead of the trailer makes things easier, too. The RV5 adds 10" of new clearance from king pin center to king pin center, giving you the extra clearance you need in a strong, easy to install accessory.
NOTICE: The RV5 should NOT BE USED in conjunction with the RV1, RV2, RV3, RV4 or any other brand fifth wheel gooseneck adapter. NOT RECOMMENDED for king pins over 18" in length, (may cause the back of the pin box to hit the bed rails when turning)
CLICK HERE FOR MEASUREMENT CHART - MUST READ, IF YOU NEED AN ADAPTER YOU MUST TAKE PROPER MEASUREMENTS OR DAMAGE TO TRUCK MAY OCCUR.